DSL-504 Modem Router

From richud.com
Jump to: navigation, search

web login

default web account

login is admin password is admin

can dump yours fro telnet/console

192.168.0.1 isfs> cat inituser
username=admin
password=admin
configFromAdsl=no
timeout=0
lcrefresh=yes
staterefresh=yes

telnet

telnet to ip, password is 'private'

Console access

Connect to console port with serial to usb lead , Putty connect raw 9600 baud to /dev/ttyUSB0

Password recovery

To recover your password

config > print


192.168.0.1 config> print
Module 'reflect':


Module 'bridge':
Active configuration:
Port 1: 'edd/DEVICE=1'
Filter age time: 300

Stored configuration:
Port 1: 'edd/DEVICE=1'
# Spanning tree configuration
bridge spanning disable

Module 'igmp':
Event level:         2
Upstream interface:  none

Module 'itex':
txGain=6
Mode=Auto
Enhance=1
Priority=Ghsfirst
Trellis=1
vendorid=0
bitswap=0
reStart=60

Module 'dnsrelay':
Server discovery mode : MANUAL
Primary  DNS server  address     : 212.139.132.24
Secondary DNS server address     : 212.139.132.25
Max connection retries: 3
state enabled
pppauto enabled
lookup host table state enabled
cache state enabled

Module 'nat':
event 1
inbound add ppp_device     25/    25/     0/tcp    192.168.0.2      enabled  tcp25           quiet
inbound add ppp_device     80/    80/     0/tcp    192.168.0.2      enabled  tcp80           quiet
inbound add ppp_device   3389/  3389/     0/tcp    192.168.0.1      enabled  tcp6129         quiet
dmzip 192.168.0.200
dmzstate enabled
inboundstate enabled
h323state enabled
ipsecstate enabled
pptpstate enabled
icqstate enabled
sipstate disabled
tcptimer 300
udptimer 60
multistate disabled

Module 'portcli':

Module 'oamcli':
loopset atm any any f4 etoe
loopset atm any any f4 segment

Module 'ip_filter':
event 2

Module 'ppp':
1 pvc atm 0 38
1 welogin xxxxxx@xxxxxxxx.co.uk xxxxxxxxx chap
1 ondemand enable 0
1 enable

Module 'ip':
device add ethernet   ether  //bridge   mtu 1500  192.168.0.1
device add ppp_device ether  //ppp/DEVICE=1 mtu 1492  79.65.26.143
nat add ppp_device

subnet add ppp_device.home . 79.65.26.0       ff:ff:ff:00
subnet add ethernet.home  . 192.168.0.0      ff:ff:ff:00

rip send    ethernet none
rip send    ppp_device none
rip accept  ethernet none
rip accept  ppp_device none

route add ppp_route          0.0.0.0 79.65.26.143 00:00:00:00 1 0 1 # MAN
relay ethernet ethernet
relay ethernet ppp_device
relay ppp_device ppp_device


ipatm lifetime 60

# IP host table:

# Port table:
telnet     23/TCP
bootps     67/UDP
tftp       69/UDP
http       80/TCP
snmp       161/UDP
router     520/UDP
l2tp       1701/UDP

# Profile:
1 ISP1 0 38 2 2 xxxxxx@xxxxxxxx.co.uk xxxxxxxxx 1 0 1 0 0.0.0.0 0.0.0.0 0.0.0.0
2 ISP2 0 38 6 1 user password 1 0 1 0 0.0.0.0 0.0.0.0 0.0.0.0
3 ISP3 0 38 1 3 user password 1 0 1 0 0.0.0.0 0.0.0.0 0.0.0.0
4 null 0 0 6 1 user password 1 0 1 0 0.0.0.0 0.0.0.0 0.0.0.0
5 null 0 0 6 1 user password 1 0 1 0 0.0.0.0 0.0.0.0 0.0.0.0
6 null 0 0 6 1 user password 1 0 1 0 0.0.0.0 0.0.0.0 0.0.0.0
7 null 0 0 6 1 user password 1 0 1 0 0.0.0.0 0.0.0.0 0.0.0.0
8 null 0 0 6 1 user password 1 0 1 0 0.0.0.0 0.0.0.0 0.0.0.0
0 0 0 0 0 0 0 0 0 0 0 0 0.0.0.0 0.0.0.0 0.0.0.0 null null null null
1 1 0 38 2 2 0 0 3 3 0 0 0.0.0.0 0.0.0.0 0.0.0.0 ppp_device Tiscali xxxxxx@xxxxxxxx.co.uk xxxxxxxxx
2 0 0 0 0 0 0 0 0 0 0 0 0.0.0.0 0.0.0.0 0.0.0.0 null null null null
3 0 0 0 0 0 0 0 0 0 0 0 0.0.0.0 0.0.0.0 0.0.0.0 null null null null
4 0 0 0 0 0 0 0 0 0 0 0 0.0.0.0 0.0.0.0 0.0.0.0 null null null null
5 0 0 0 0 0 0 0 0 0 0 0 0.0.0.0 0.0.0.0 0.0.0.0 null null null null
6 0 0 0 0 0 0 0 0 0 0 0 0.0.0.0 0.0.0.0 0.0.0.0 null null null null
7 0 0 0 0 0 0 0 0 0 0 0 0.0.0.0 0.0.0.0 0.0.0.0 null null null null
8 0 0 0 0 0 0 0 0 0 0 0 0.0.0.0 0.0.0.0 0.0.0.0 null null null null

# SNMP configuration:
access read public
access write private

192.168.0.1 config>